how to reline a kitchenaid stand mixer ?

Relining a KitchenAid Stand Mixer can be a daunting task, but with the right instructions, it can be done with relative ease. Below are the steps to reline your KitchenAid Stand Mixer.

1. Unplug your KitchenAid Stand Mixer. Make sure to unplug the power cord from the wall outlet and not the cord from the mixer.

2. Remove the bowl and attachments from the KitchenAid Stand Mixer.

3. Remove the screws that hold the base to the bowl. You will need a Phillips head screwdriver to do this.

4. Gently pry the base off of the bowl.

5. Using a knife or razor blade, carefully peel off the old lining from the bowl.

6. Once all of the old lining is removed, clean the bowl with a damp cloth or paper towel.

7. Cut a piece of new lining to fit the bowl. Make sure that the new lining is slightly larger than the bowl to ensure a tight fit.

8. Place the new lining onto the bowl and press it firmly into place.

9. Secure the base back onto the bowl with the Phillips head screws.

10. Re-attach the bowl and the attachments to the KitchenAid Stand Mixer.

11. Finally, plug the mixer back into the wall outlet and you are ready to use your KitchenAid Stand Mixer with a brand new lining.

By completing these eleven steps, you’ll have successfully relined your KitchenAid Stand Mixer. Make sure to keep the old lining in case you need to replace it in the future.

Frequently Asked Questions

FAQ #1: How do I reline a KitchenAid stand mixer?
Answer: To reline a KitchenAid stand mixer, start by unplugging the mixer and removing the bowl. Then, remove the screw holding the mixer head in place and gently lift the head off. Next, inspect the bowl and beater for any buildup, and clean them with a damp cloth. After that, carefully apply the new liner to the bowl, making sure it is evenly placed. Finally, reattach the head and tighten the screw, and your mixer is ready to use.

FAQ #2: Is it difficult to reline a KitchenAid stand mixer?
Answer: Relining a KitchenAid stand mixer is not difficult, as long as you follow the instructions carefully. It should take about 10-15 minutes to complete the relining process.

FAQ #3: Is it necessary to reline my KitchenAid stand mixer?
Answer: Yes, it is important to reline your KitchenAid stand mixer periodically to keep it in good working condition and ensure that your food is prepared safely.

FAQ #4: What kind of liner should I use to reline my KitchenAid stand mixer?
Answer: It is best to use a liner specifically designed for KitchenAid stand mixers. This will ensure that the liner fits properly and will not damage your mixer.

FAQ #5: How often should I reline my KitchenAid stand mixer?
Answer: It is recommended to reline your KitchenAid stand mixer at least once a year. However, you may need to reline it more often if you use your mixer frequently or if your mixer has been exposed to excessive moisture.

Similar Posts

Leave a Reply

Your email address will not be published.