how to replace a kitchenaid stand mixer motor ?

Replacing the motor of a KitchenAid stand mixer is a relatively easy task for those with some basic mechanical and electrical knowledge. You will need to have the right tools and parts to complete the job.

The first step is to unplug the mixer from the wall and disconnect all the electrical connections. You will then need to remove the bowl and beater attachments and loosen the screws that hold the base of the mixer to the counter. Once the base is removed, you will need to locate the motor. It will be connected to the bottom of the mixer by two screws.

Once the screws are removed, the motor should be easily accessible. Carefully remove the old motor and disconnect the electrical connections. Make sure to keep track of which wires go where.

Next, you will need to get a replacement motor. Be sure to purchase a motor with the same wattage and voltage as the original. You should also double-check the size and shape of the motor to make sure it is the correct one for your mixer.

Once you have the new motor, it is time to install it. Start by connecting the electrical connections to the motor and then mounting it to the bottom of the mixer. Make sure to tighten the screws securely.

Finally, reattach the bowl and beater attachments and reattach the base of the mixer to the counter. Plug the mixer back in and turn it on to make sure the new motor works.

Replacing a KitchenAid stand mixer motor may seem intimidating, but with the right tools and parts it is a relatively simple task. Just make sure you understand all of the steps before starting the job to ensure a successful installation.

Frequently Asked Questions

FAQ 1: How do I replace a KitchenAid stand mixer motor?
Answer: To replace a KitchenAid stand mixer motor, you will need to unplug the mixer, remove the screws that hold the motor in place, unplug the wiring harness, and then remove the motor assembly. Finally, install the new motor assembly, reconnect the wiring harness, and reattach the screws to secure the motor in place.

FAQ 2: What type of motor does a KitchenAid stand mixer use?
Answer: KitchenAid stand mixers use universal motors, which are electric motors that are able to operate on either AC or DC power.

FAQ 3: How much does it cost to replace a KitchenAid stand mixer motor?
Answer: The cost of replacing a KitchenAid stand mixer motor will depend on the type of motor you need and the cost of the replacement motor. Generally, you can expect to spend anywhere from $50 to $200 on a replacement motor.

FAQ 4: Is it difficult to replace a KitchenAid stand mixer motor?
Answer: Replacing a KitchenAid stand mixer motor can be a difficult task, as it requires some electrical knowledge and experience with working with small parts. If you are not confident in your ability to replace the motor, it is best to take the mixer to a qualified service technician.

FAQ 5: How long does it take to replace a KitchenAid stand mixer motor?
Answer: Replacing a KitchenAid stand mixer motor will usually take anywhere from 30 minutes to an hour, depending on your experience and the complexity of the motor assembly.

Similar Posts

Leave a Reply

Your email address will not be published.