how to replace bearing on kitchenaid stand mixer k45 ?

Replacing the bearing on a KitchenAid K45 stand mixer is an easy task that anyone can do. With the right tools, it can be done in less than an hour. In this article, we will go over the steps you need to take to successfully replace the bearing on your KitchenAid K45 stand mixer.

First, you will need to acquire the correct bearing for your mixer. Fortunately, these are readily available online or at stores that specialize in KitchenAid parts. Make sure to double check that the bearing is the same size and shape as the one you are replacing.

Once you have the bearing, you will need to get a few tools together. These include a screwdriver, an adjustable wrench, and a hammer. You may also want to have some lubricant handy, such as a small tube of grease.

To begin the process, unplug the power cord from the mixer and remove the bowl from the stand. Next, you will need to unscrew the four bolts that hold the housing in place. Once they are removed, you can carefully lift the housing off of the mixer.

Once the housing is off, you will be able to access the bearing. You will need to remove the bearing from its mount by unscrewing the mounting screws and then gently tapping it out with the hammer.

Once the bearing is removed, you can place the new bearing in its mount and secure it with the mounting screws. Make sure the bearing fits snugly and is properly aligned.

Reassemble the housing and reattach it to the mixer. Once the housing is in place, you can reattach the bowl and power cord.

Finally, you can test the mixer to make sure the bearing is working properly. If it is, you have successfully replaced the bearing on your KitchenAid K45 stand mixer. Congratulations!

Frequently Asked Questions

FAQ 1: How do I replace the bearing on my KitchenAid stand mixer K45?
Answer: To replace the bearing on a KitchenAid stand mixer K45, you will need to remove the mixer’s bowl and bowl attachment, loosen the screws that secure the mixer’s housing, remove the old bearing, and install the new bearing. Make sure to use a grease or oil to lubricate the new bearing before installation.

FAQ 2: What tools do I need to replace the bearing on my KitchenAid stand mixer?
Answer: To replace the bearing on a KitchenAid stand mixer, you will need a Philips head screwdriver, a flat-head screwdriver, and a grease or oil for lubrication.

FAQ 3: How do I know if I need to replace the bearing on my KitchenAid stand mixer?
Answer: If your KitchenAid stand mixer is making loud noises, vibrating, or not mixing ingredients properly, you may need to replace the bearing.

FAQ 4: What type of bearing do I need for my KitchenAid stand mixer K45?
Answer: The type of bearing you will need for your KitchenAid stand mixer K45 is a sealed, ball bearing.

FAQ 5: Is it difficult to replace the bearing on my KitchenAid stand mixer?
Answer: Replacing the bearing on a KitchenAid stand mixer is not difficult if you have the right tools and instructions. However, it is important to take your time and follow all instructions carefully to ensure proper installation.

Similar Posts

Leave a Reply

Your email address will not be published.