how to replace bearing on kitchenaid stand mixer ?

Replacing the Bearing on a Kitchenaid Stand Mixer

If you’ve ever noticed a loud grinding noise coming from your Kitchenaid stand mixer, chances are the cause is a worn bearing. Replacing the bearing is a relatively easy task to do at home, and should take no more than an hour. This article will provide you with a step-by-step guide on how to replace the bearing on your Kitchenaid stand mixer.

Before you begin, make sure you have all the necessary tools and materials. You’ll need a Phillips screwdriver, a flathead screwdriver, a hammer, a pair of pliers, and a new bearing. You may also need some lubricant, depending on the type of bearing you have.

Step 1: Unscrew the Base

The first step is to unscrew the base of your stand mixer. To do this, you’ll need to use the Phillips screwdriver. Once the screws are removed, you can lift off the base.

Step 2: Remove the Motor

Next, you need to remove the motor from the mixer. To do this, use the flathead screwdriver to loosen the screws that hold the motor in place. Once the screws are removed, you can lift the motor out of the mixer.

Step 3: Remove the Old Bearing

Now you can remove the old bearing. Use the pliers and the hammer to carefully unscrew the bearing. Depending on the type of bearing, you may need to use some lubricant to help loosen the bearing.

Step 4: Install the New Bearing

Once the old bearing has been removed, you can install the new one. Again, depending on the type of bearing you have, you may need to use some lubricant to help get it into place. Once the bearing is in place, use the hammer and pliers to secure it.

Step 5: Reinstall the Motor

Finally, reinstall the motor and the base. To do this, simply reverse the steps you used to remove the motor and base. Make sure the screws are tight and secure, and you’re done!

Replacing the bearing on your Kitchenaid stand mixer is a simple process that should take no more than an hour. With the right tools and materials, you can easily complete this task on your own and get your mixer running smoothly again.

Frequently Asked Questions

FAQ 1: How do I replace the bearing on a KitchenAid stand mixer?
Answer: To replace the bearing on a KitchenAid stand mixer, first unplug the mixer and remove the bowl. Next, remove the mounting plate and screws that secure the bearing to the mixer body. Once the bearing is removed, replace it with a new one and reassemble the mixer.

FAQ 2: What type of bearing is used on KitchenAid stand mixers?
Answer: KitchenAid stand mixers use a sealed bearing housing with a steel ball bearing.

FAQ 3: Where can I purchase a replacement bearing for a KitchenAid stand mixer?
Answer: Replacement bearings for KitchenAid stand mixers can be purchased online or at any KitchenAid dealer.

FAQ 4: What tools are needed to replace the bearing on a KitchenAid stand mixer?
Answer: To replace the bearing on a KitchenAid stand mixer, you will need a Phillips-head screwdriver and an adjustable wrench.

FAQ 5: How long does it take to replace the bearing on a KitchenAid stand mixer?
Answer: Replacing the bearing on a KitchenAid stand mixer typically takes about 30 minutes.

Similar Posts

Leave a Reply

Your email address will not be published.